Effective Underfloor Heating in the Basement: How to Ensure Optimal Heating in Your Basement
Optimal heating in the basement is crucial for creating comfort while also saving energy. Underfloor heating plates are an effective and economical way to heat your basement.
They also offer several advantages, such as a low construction height, which can be particularly relevant in basements where the ceiling height may be limited.
Read more in our guide below and gain insights into underfloor heating in the basement.
What are underfloor heating plates?
Underfloor heating plates are panels with built-in grooves for the underfloor heating tubes. They serve as an efficient heat source placed directly beneath the flooring. This method evenly distributes heat, creating a comfortable temperature throughout the basement. The benefits of using underfloor heating plates include increased comfort, energy savings, and the option for individual temperature control.
Installation of underfloor heating plates in basements
The installation of underfloor heating plates requires several steps to ensure optimal performance. First, you need to prepare the subfloor by ensuring it is level and adequately insulated. Next, lay out the underfloor heating plates in the desired pattern and connect the heating tubes to the plates. It's essential to closely follow the manufacturer's instructions to ensure proper installation.
NORDIC underfloor heating plates have the significant advantage of built-in insulation in the panel. The plates consist of XPS insulation, which effectively retains heat. NORDIC underfloor heating plates can reduce heating bills by between 40 and 60 percent compared to traditional heating methods.
NORDIC Floor Insulation Panels
To achieve optimal heating with underfloor heating plates in the basement, it is important to adjust the temperature according to the room's needs. This can be done using a thermostat that can be set to maintain the desired temperature. Additionally, it is crucial to ensure that heat is evenly distributed throughout the basement by placing the underfloor heating plates correctly.
NORDIC underfloor heating plates have aluminum heat distribution across the entire panel, providing more efficient heating with underfloor heating in your basement.
The panels quickly distribute heat, offering effective heating at low supply temperatures or when using electricity. This contributes to reducing energy consumption, resulting in improved indoor air quality and increased comfort. Simultaneously, it leads to lower heating bills and reduced environmental impact.
Low Construction Height
One of the significant advantages of NORDIC underfloor heating plates is their low construction height. This makes them ideal for the basement, where space is often limited, and ceiling height is low. Underfloor heating plates with low construction height can be easily installed without significantly affecting floor height, making them suitable for both renovations and new construction.
In the renovation of older homes, the height of the new floor can be a significant challenge. For such tasks, NORDIC underfloor heating plates are available in a special type that is only a few millimeters thicker than the heating tube – 16 mm in height for 12 mm underfloor heating tubes and only 19 mm in height for 16 mm underfloor heating tubes/ pipes.
Are there specific precautions when installing underfloor heating in a basement?
Yes, there are some specific precautions to consider when installing underfloor heating in a basement. Here are some important points to remember:
- Waterproofing: It is crucial to ensure that the basement is waterproof before installing the underfloor heating system. The basement should be free of leaks and moisture problems, as this can cause damage to the floor and flooring.
- Insulation: Properly insulating the basement floor is important to avoid heat loss. Good insulation will help keep the heat inside the room and enhance the efficiency of the underfloor heating system.
- Construction Height: In basements, construction height is often limited. Therefore, it may be a good idea to choose underfloor heating plates with grooves for the underfloor heating tubes. These plates can be installed directly on the floor and require only minimal construction height. It is important to choose high-quality plates to ensure effective and reliable heating.
Do you have a crawl space under the house?
This may require removing the crawl space and instead constructing a ground slab, which constitutes the part that separates the house from the ground. In this context, you can then install underfloor heating.
Insulating a crawl space is not recommended.
How to Install Underfloor Heating Plates in a Basement?
Installation of underfloor heating plates in a basement can be carried out through the following steps:
- Floor Preparation: Start by cleaning and leveling the floor, addressing any irregularities or damage. It is also advisable to check for waterproofing and implement additional measures if necessary.
- Placement of Underfloor Heating Plates: Position the underfloor heating plates evenly on the floor with the correct spacing between each plate. It is recommended to follow the manufacturer's instructions for proper placement and attachment of the plates.
- Installation of Underfloor Heating Tubes: Place the underfloor heating tubes in the grooves on the underfloor heating plates. Ensure that the tubes lie evenly without kinks or bends. The tubes should also be correctly connected to the underfloor heating system.
- Completion of Installation: After the underfloor heating tubes are installed, cover the floor with a suitable flooring material, such as tiles or wooden planks. It is recommended to follow the manufacturer's instructions for proper flooring installation.
- Testing and Adjustment: Upon completion of the installation, test the underfloor heating system to ensure proper functioning. Adjustments may be necessary to achieve the desired temperature and efficiency.
Which Types of Underfloor Heating are Best Suited for a Basement?
When choosing the most suitable type of underfloor heating for a basement, several factors need consideration. One of the crucial considerations is the low construction height typically found in basements. Therefore, it is essential to find an underfloor heating solution that doesn't require much space and can be installed without significantly raising the floor level.
One of the best solutions for a basement is the use of underfloor heating plates. These plates are designed with built-in grooves for the underfloor heating tubes, making installation easy and quick. The plates can be mounted directly on the concrete floor and then covered with a thin layer of floor leveling compound or another flooring system. This solution is ideal for basements, as it doesn't require much space and doesn't significantly raise the floor level.
Another advantage of underfloor heating plates is their efficient heat distribution. With the heating tubes placed inside the grooves in the plates, there is a uniform and consistent heat distribution across the entire floor surface, ensuring comfortable and efficient heating of the basement.
It is also important to choose an underfloor heating solution suitable for the basement environment. Since basements are typically more humid than other rooms in the house, selecting a waterproof and moisture-resistant underfloor heating solution is crucial. Underfloor heating plates are usually made of materials suitable for resisting moisture, making them an ideal choice for basements.
Another option for underfloor heating in the basement is the use of electric heating mats or cables. These can be installed directly on the concrete floor and covered with a thin layer of floor leveling compound or another flooring system. Electric heating mats are also suitable for basements, as they don't require much space and can be customized to the desired floor area.
It is important to note that electric heating mats and cables may be more expensive to operate than underfloor heating plates, as they use electricity for heating. Additionally, they may be more cumbersome to install, requiring electrical connection and possibly additional insulation to achieve the desired efficiency.
In addition to choosing the underfloor heating system, it is also important to consider the insulation of the basement floor. Proper insulation can help minimize heat loss and improve the efficiency of the underfloor heating system. Therefore, it is recommended to insulate the basement floor with a layer of insulation material before installing the underfloor heating system.
In summary, the use of underfloor heating plates is an effective and economical way to heat a basement. Their low construction height and easy installation make them suitable for the basement environment. However, it is important to choose a solution that matches the insulation of the basement floor and is suitable for the humid environment. By considering these factors, one can achieve comfortable and energy-efficient heating of the basement.
Contact Us for More Information
Underfloor heating plates are an effective and economical solution for heating your basement. By choosing this method, you can achieve optimal heating, increased comfort, and energy savings. If you seek additional advice or assistance with installation, we recommend reaching out to a professional in the field.
Contact us today if you have any questions.
Read more about
